Fuse Box Diagram Jeep Liberty (2024)

FAQs

Where are the fuses on a 2004 Jeep Liberty? ›

The fuse boxes are in 2 locations. One is under the hood on the left side of the engine behind the battery. The second is on the driver side of the dashboard. Open the drivers door and look at the side of the dashboard; there you'll see a cover with a tang.

To remove the fuse box lid, put your finger in the notch on the lid, pull it toward you, and take it out of its hinges. The fuses are located in five fuse boxes. The interior fuse boxes are located under the dashboard on the driver's and passenger's side.

Usually, you will find two fuse boxes in the car. One is located under the hood and the other is found in the dashboard or near the steering wheel.

There is only one fuse boxAnd it is called the Integrated Power Module. The Integrated Power Module or IPM is located under the hood of the Liberty. You will be able to easily locate it right on top of the battery on the driver's side of the vehicle. It is rectangular shaped with a smooth black cover that is removable.

In most cases, the main fuse box is situated under the hood, near the battery, while secondary panels can be found in the passenger compartment, often hidden behind a removable panel.

To locate the fuse specification chart for your vehicle or to learn how to change a fuse, refer to the "Fuses" section of your Owner's Manual.

There are two fuse boxes, one located near the engine or under the hood and the other is located near the driver seat. Cars have various electrical components that require a fuse to protect against short circuits.

The only fuse box is in the engine bay.

Which Fuse Controls the Dashboard Gauge? The instrument cluster fuse manages the dashboard gauge of a vehicle. It uses electricity from the car battery to power various electronic components of the dashboard such as the different warning lights, gauges, and alarm systems.

There isn't an interior fuse panel; all of the fuses are located in a box near the windshield on the passenger side of the engine compartment. If you have the auxiliary switches there will be a constant and switched 12 volt wire along with the 4 auxiliary wires under the dash on the passenger side foot well.

Where is blown fuse located? ›

Usually, it will be in your garage or your basem*nt. Open the fuse box and look at the glass containers that hold the fuses. If you can see that the fuse is visibly broken, or there is metallic residue on the glass from the fuse blowing, you will need to replace that particular fuse.

The instrument cluster fuse manages the dashboard gauge of a vehicle. It uses electricity from the car battery to power various electronic components of the dashboard such as the different warning lights, gauges, and alarm systems. They include but are not limited to the following: Speedometer.